Website navigation

TECHNICAL

Position:Home > Technical

Vacuum brazing furnace operation manual

Time:2024-04-02 Click:0
  

The operation manual of vacuum brazing furnace usually includes detailed guidance on safe operation, maintenance, and troubleshooting of the equipment. The following is a basic summary of the vacuum brazing furnace operation manual, but please note that the specific operating steps and details may vary depending on different models and manufacturers of vacuum brazing furnaces. Therefore, it is strongly recommended to carefully read and follow the specific operating manual and safety guidelines provided by the equipment manufacturer before conducting actual operations.

High temperature molybdenum screen vacuum brazing furnace (click on the picture to view product details)
High temperature molybdenum screen vacuum brazing furnace (click on the picture to view product details)

1. Safety precautions
Operators must be familiar with the structure and performance of the equipment, understand the basic principles and operational requirements of vacuum brazing.
During the operation, appropriate protective equipment must be worn, such as protective goggles, gloves, etc.
It is strictly prohibited to carry out maintenance or repair work on the equipment during operation.
When there is a malfunction or abnormal situation in the equipment, the operation should be stopped immediately and professional maintenance personnel should be notified for handling.

2. Equipment preparation
Check if the equipment is intact, if all components are complete, and if fasteners are loose.
Check if the power supply, water source, gas source, etc. are normal to ensure that the equipment can operate normally.
Clean the interior of the equipment to ensure that there are no foreign objects, oil stains, etc. in the furnace.

3. Operation steps
Turn on the device power, start the vacuum pump, and vacuum the furnace.
When the vacuum level in the furnace reaches the required level, turn off the vacuum pump and start heating.
Set the heating temperature and time according to the process requirements, and start the heating system.
During the heating process, regularly check the operation status of the equipment and whether the process parameters meet the requirements.
After heating is completed, turn off the heating system and turn on the cooling system to cool the equipment.
After cooling to room temperature, open the furnace door and take out the workpiece.

4. Equipment maintenance
Regularly clean and maintain the equipment to ensure it is in good working condition.
Regularly check whether the vacuum system, heating system, cooling system, etc. of the equipment are working properly.
If any malfunction or abnormal situation is found in the equipment, professional maintenance personnel should be contacted in a timely manner for repair.

5、 Troubleshooting
The equipment may experience various malfunctions during operation, such as insufficient vacuum and uneven heating. For these faults, they should be handled according to the troubleshooting guidelines provided by the equipment manufacturer. When troubleshooting, pay attention to safety and do not disassemble equipment components randomly.

A commonly used vacuum brazing furnace (click on the image to view product details)
A commonly used vacuum brazing furnace (click on the image to view product details)

Vacuum brazing furnace is a high-precision equipment that must be operated strictly in accordance with the operating manual and safety guidelines. Through correct operation and maintenance, the stable operation and extended service life of the equipment can be ensured.Click to learn more Vacuum Furnace! Or click on online customer service to learn more about product information!

Contact Information

E-mail:
web@kejiafurnace.com
Address:
No.18 Hongye Road, Hi-tech zone , Zhengzhou, China, 450000
QQ tel Email WhatApp FaceBook

Tel Number

181-3719-5600

Email

web@kejiafurnace.com

WhatsApp

+86/18037178440

FaceBook

Zhengzhou/Kejia

kejialiuyan