Vacuum atmosphere furnace maintenance way to resolve
Time：2015-09-06 10:07 Click：
Today kejia Furnace Manufacturing Co., Ltd. to introduce some of the common problems in a vacuum atmosphere furnace atmosphere furnace and solutions:
1, when the device is still in the experimental operation of the process presents problems, handling problems presented the appearance of a corresponding prompt appears and a voice alarm. The operator can control the operation of the problems in the use of equipment to remove a chapter in view of rapid attributed to what kind of problems, you can ask professionals to quickly eliminate the problems, in order to ensure the normal operation of the experiment. Other environmental test equipment in use in other appearance will be, it would have to detail the appearance, detailed analysis and clearance.
2, in the high temperature experiments, such as temperature changes reach the test temperature, it is possible to view the electrical system, one by one eliminate problems. As the temperature rises very slowly, it is necessary to view the air circulation system, look at the air conditioning cycle shutter is not open properly, on the contrary, they view the motor operation is not normal air circulation. If the temperature overshoot fierce then you need to set the parameters tuning PID. If the temperature rises directly, over temperature maintenance, then the manipulator go wrong, to be replaced by manipulation appearance.
3, low temperature reach the goal of the experiment, then you have to investigate changes in temperature, the temperature drop is very slow, is still to a certain temperature after the value of temperature rise, the former is necessary to look at, do low-temperature vacuum furnace atmosphere Before the experiment is not the job drying chamber, so that the working chamber and then to keep dry test sample into a job to do too much indoor experiment job sample chamber is not positioned so that the job can not be plenty of indoor air circulation, in After sweeping the above reasons, we should ponder is not a refrigeration system problems, so we must ask the manufacturer for repair professionals.
Please leave a message here. We will reply you in 24 hours.
English
简体中文
English
Français
日本語
한국어
Português
Русский
Español
